Skip to main content

Ground Control Beta

Answer will appear here...

Back to top

You can take a video by using touch, voice, or Laser Ink. All video captures are 15 seconds in length unless you manually stop recording.

Using touch

  1. Use two fingers to tap twice on the touchpad, holding your fingers down for a few seconds on the second tap. 
  2. You’ll hear a tone indicating Ai Photographer is about to begin recording video. 
  3. Once recording begins, the Trust Light will flash green for the entirety of the recording (15 seconds by default). 
  4. You’ll hear another tone when recording has ended. 

Using voice

  1. Press and hold one finger on the touchpad. You will see the Trust Light flashing orange and hear a chime indicating Ai Mic is listening. 
  2. Say “Take a video.”
  3. Release your finger from the touchpad. The Trust Light will stop flashing and you will hear a chime indicating Ai Mic is no longer listening. 
  4. You’ll hear a tone indicating Ai Photographer is about to begin recording video. The Trust Light will flash green for the entirety of the recording (15 seconds). 
  5. You’ll hear another tone when recording has ended. 

Using Laser Ink 

  1. Tap the touchpad with one finger to indicate you’d like to activate Laser Ink.
  2. Open your hand. You should see the Trust Light flashing white to indicate your Ai Pin is scanning for your hand.
  3. Once detected, the Laser Ink Display will project on your hand.
  4. Push out your hand a few more inches until you see the menu.
  5. Pick the capture button.
  6. Pick “video.”
  7. You’ll see a countdown animation and hear three chimes. 
  8. Lower your hand to record the video. 
  9. You’ll hear a tone indicating Ai Photographer is about to begin recording video. The Trust Light will flash green for the entirety of the recording (15 seconds).  
  10. You’ll hear another tone when recording has ended. 

To manually stop recording a video

If you wish to stop a video before it automatically ends at 15 seconds, use one finger to double tap the touchpad. You’ll hear a tone to indicate recording has ended and the Trust Light will stop flashing. 

We’re here to help