Skip to main content

Ground Control

Answer will appear here...

Back to top

To pair a Bluetooth device with your Ai Pin, see Pair a Bluetooth device.

Using voice

  1. Press and hold one finger on the touchpad. You will see the Trust Light flashing orange and hear a chime indicating Ai Mic is listening. 
  2. Say “Turn Bluetooth on” or “Turn Bluetooth off.”
  3. Release finger from the touchpad. The Trust Light will stop flashing and you’ll hear a chime indicating Ai Mic is no longer listening.
  4. Ai Pin will answer, "Bluetooth enabled," or "Bluetooth disabled."

Using Laser Ink

  1. Tap the touchpad with one finger to indicate you’d like to activate Laser Ink.
  2. Open your hand. You should see the Trust Light flashing white to indicate your Ai Pin is scanning for your hand.
  3. Once detected, the Laser Ink Display will project on your hand
  4. Push out your hand a few more inches until you see the menu.
  5. Pick settings .  
  6. Scroll to “bluetooth” and pick it to toggle on  or off .

We’re here to help