Skip to main content

Ground Control Beta

Answer will appear here...

Back to top

Ai Pin + Battery Booster

Using voice

  1. Press and hold one finger on the touchpad. You will see the Trust Light flashing orange and hear a chime indicating Ai Mic is listening. 
  2. Ask “What’s the power level?”, “What’s my battery life?”, or something similar.
  3. Release your finger from the touchpad. The Trust Light will stop flashing and you will hear a chime indicating Ai Mic is no longer listening. 
  4. Ai Pin will let you know the power levels of both Ai Pin and the Battery Booster, respectively. If wearing any accessory other than the Booster, it will reply with only the Ai Pin battery percentage. 

NoteIf your Booster's battery is is depleted, Ai Pin will only reply with Ai Pin's battery percentage.

Using Laser Ink

  1. Tap the touchpad with one finger to indicate you’d like to activate Laser Ink.
  2. Open your hand. You should see the Trust Light flashing white to indicate your Ai Pin is scanning for your hand.
  3. Once detected, the Laser Ink Display will project on your hand.
  4. Push out your hand a few more inches until you see the menu.
  5. The combined battery level of your Ai Pin + Booster appears in the lower righthand corner (e.g. 95%).

Low battery alerts

Your Ai Pin will notify you when it reaches 10% battery and when your Booster reaches 10%. 

When you hear these alerts, swap out your Booster with a fully charged one. Alternatively, place both your Pin and Booster on the Charge Pad or in the Charge Case.

Charge Pad

Tap the side of your Charge Pad to see the cumulative power level of the device(s) on the Charge Pad. The colored that appears when you tap the Charge Pad corresponds with the following power levels:

  • Green: Charge > 80% (Ready to use)
  • Amber: Charge < 80%

If the Battery Booster is attached to your Ai Pin, the LED will show the cumulative power level of both devices. If only the Battery Booster is present, the LED will show its power level. 

Charge Case

The light on the Charge Case will initially show the cumulative power level of the device(s) in the Charge Case (e.g., Battery Booster alone or Ai Pin + Booster). 

  • Green: Charge > 80% (Ready to use)
  • Amber: Charge < 80%

If the Charge Case is empty, the light will show its power level.

We’re here to help