Skip to main content

Ground Control Beta

Answer will appear here...

Back to top

The power setting shows the battery level of Ai Pin. It also provides options for powering off or restarting Ai Pin.

To power off

Using voice

  1. Press and hold one finger on the touchpad. You will see the Trust Light flashing orange and hear a chime indicating Ai Mic is listening.
  2. Say "power off."
  3. Release your finger from the touchpad. The Trust Light will stop flashing and you will hear a chime indicating Ai Mic is no longer listening.

Using Laser Ink

  1. Tap the touchpad with one finger to indicate you’d like to activate Laser Ink.
  2. Open your hand. You should see the Trust Light flashing white to indicate your Ai Pin is scanning for your hand.
  3. Once detected, the Laser Ink Display will project on your hand.
  4. Push out your hand a few more inches until you see the menu.
  5. Pick settings .  
  6. Scroll to “power” and pick it.
  7. Pick "power off."

To restart Ai Pin

  1. Tap the touchpad with one finger to indicate you’d like to activate Laser Ink.
  2. Open your hand. You should see the Trust Light flashing white to indicate your Ai Pin is scanning for your hand.
  3. Once detected, the Laser Ink Display will project on your hand.
  4. Push out your hand a few more inches until you see the menu.
  5. Pick settings .  
  6. Scroll to “power” and pick it. 
  7. Pick "restart."

To wake up Ai Pin after power off

  1. Attach your Ai Pin + Booster and place them on a Charge Pad or in a powered Charge Case.
  2. Wait a few minutes until you see the rainbow Trust Light, indicating your Ai Pin is powered on again and ready for use. 

NoteIf powering Ai Pin on after a fully depleted battery, you may have to wait 15-20 minutes for your device to boot up on the Charge Pad or Charge Case.

We’re here to help